V-Packing Set
Installation
Benefits
Robust multi-lip design for maximum seal life
Easily configured for retrofit applications
Preferred design for rams with worn surfaces over conventional seal
Prove design with long history of success
Applications
The 140 Series V-Packing is a popular choice in heavy duty applications requiring maximum service life and leak-free performance.
Typical Applications
- Heavy duty forging presses
- Stamping presses
- Injection molding machines
- Extrusion presses
- Board presses
- Legacy equipment
Molded designs: Common construction consists of nitrile and fabric and fluoroelastomer and fabric for higher temperatures.
Machined designs: Available in abrasion-resistant polyurethane, nitrile, HNBR, EPDM and fluoroelastomer.
| Material | Code |
|---|---|
| NBR/Cotton/Polyamide/H-PUR | MN142 |
| NBR/fabric | MN50 |
| NBR and PTFE Bz | MN19 |
| NBR and Polyamides | MN13 |
| HNBR and PTFE/Bz | MN32 |
| Temperature | MN142 °C |
°F | ||
|---|---|---|---|---|
| hydraulic oil | -30…+100 | -22…+212 | ||
| water oil emulsions (HFA) | +5…+60 | +41…+140 | ||
| water-glycol fluids (HFC) | -30…+60 | -22….+140 | ||
| water | +5…+100 | +41…+212 | ||
| Speed | 0.5 m/s (1.6 ft/sec) | |||
| Pressure | 400 bar (6000 psi) | |||
Note:for other materials or fluids please contact our engineering department.