Rod Seal U-Cup – Asymmetrical – Spring Loaded
Installation
Benefits
Wide temperature range
Highly extrusion resistant with the use of a backup ring
Excellent fluid compatibility including water-based fluids and aggressive fluids
Exceptional low friction performance
Available in all standard sizes
Optional spring alloys available for improved performance and compatibility
Applications
The 119 series rod seal is ideal for most applications requiring low friction, high temperature, and improved fluid compatibility.
Typical applications include:
- Hydraulic and Pneumatic Cylinders
- Pressure Accumulators
- Valve Stems
- Nozzles
- High Temperature
- Aggressive Fluids
The 119 series rod seal features low friction PTFE energized with an internal spring. Standard materials are MT200 PTFE filled with Carbon/Graphite, available in standard sizes using a stainless steel spring. Also available with Elgiloy spring as an option for high heat or added chemical resistance. To suit a variety of applications, the series is also available in various filled PTFEs as well as Polyurethane and UHMW.
Material | Code |
---|---|
PTFE/Bz + Spring | MT20 |
PTFE/Glass Moly + Spring | MT116 |
PTFE/Virgin + Spring | MT119 |
PTFE/Carbon/Graphite + Spring | MT200 |
UHMW + Spring | ML47 |
Polyurethane + Spring | MP172 |
Material | Temperature | Code | Speed |
---|---|---|---|
PTFE/Bz + Spring | -200F…+575F | MT20 | 5 m/sec |
PTFE/Glass Moly + Spring | -250F…+550F | MT116 | 5 m/sec |
PTFE/Virgin + Spring | -425F…+450F | MT119 | 5 m/sec |
PTFE/Carbon/Graphite + Spring | -320F…+425F | MT200 | 5 m/sec |
UHMW + Spring | -150F…+180F | ML47 | 5 m/sec |
Polyurethane + Spring | -30F…+230F | MP172 | 0.5 m/sec |
Note: for other materials or fluids please contact our engineering department.