Rod Seal – HD Energizer – AE Ring
Installation
Benefits
Low friction
Short-stroke applications
High-temperature resistance
Low wear
Extrusion resistant
Compatible with a wide range of media
Available in diameters up to 2100Â mm
Applications
The 188 Series Heavy-Duty Rod Seal with Integrated Backup Ring is ideal for high-pressure sealing applications, offering low-friction performance and short-stroke capability.
Typical Applications
- Forging presses
- Extrusion Presses
- Stamping presses
- Rolling Mills
- Injection Molding Machines
- Hydraulic Presses
The 188 Series is a custom blended PTFE filled compound that provides ultra-low friction and high-speed performance with minimal wear. The standard compounds are PTFE with Bronze filler, or PTFE filled with Glass-Moly. The backup ring can be made from Polyamide, Delrin or POM. The temperature range of the seal can be increased by selecting a FPM energizer in place of the standard NBR energizer.
| Material | Code |
|---|---|
| PTFE-Bronze + NBR + POM | MT24 |
| PTFE-Glass-Moly | MT84 |
| Temperature | MT24 °C |
°F | MT84 °C |
°F |
|---|---|---|---|---|
| hydraulic oil | -30…+100 | -22…+212 | -30…+100 | -22…+212 |
| water oil emulsions (HFA) | – | -0 | +5…+60 | +40…+140 |
| water-glycol fl uids (HFC) | – | – | -30…+60 | -22…+140 |
| polyol esters (HFD) | – | – | – | – |
| water | – | – | -5…+100 | +40…+212 |
| Speed | 5 m/s (16.5 ft/sec) | |||
| Pressure | 400 bar (6000 psi) | |||
Note: for other materials or fluids please contact our engineering department.