Rod Seal – Double Acting – OR Energizer
Installation
Benefits
Low friction
High-speed applications
High-temperature resistance
Low wear
Extrusion resistant
Compatible with a wide range of media
Available in diameters up to 2100mm
Applications
The 192 Series Rod Seal is ideal for high-pressure sealing applications, offering low-friction performance and double-acting operation.
Typical Applications
- Injection Molding
- Mobile Hydraulics
- Hydraulic Presses
- Used as a buffer seal in a Zero-Leak Technology System
System Seals™ unique filled PTFE compounds provide ultra-low friction and high-speed performance with minimal wear. The standard compounds are PTFE with Bronze filler, or PTFE filled with Glass-Moly. The temperature range of the seal can be increased by selecting a FPM O-Ring in place of the standard NBR O-Ring.
| Material | Code |
|---|---|
| PTFE-Bronze Compound + NBR O-Ring | MT23 |
| PTFE-Bronze Compound + FPM O-Ring | MT26 |
| PTFE-Glass/MoS2 compound + NBR O-Ring | MT83 |
| PTFE-Glass/MoS2 compound + FPM O-Ring | MT86 |
| Temperature | MT23 °C |
°F | MT83 °C |
°F |
|---|---|---|---|---|
| hydraulic oil | -30…+100 | -22…+212 | -30…+100 | -22…+212 |
| water oil emulsions (HFA) | – | – | +5…+60 | +40…+140 |
| water-glycol fluids (HFC) | – | – | -30…+60 | -22…+140 |
| polyolesters (HFD) | – | – | – | – |
| water | – | – | -5…+100 | +40…+212 |
| Speed | 5 m/s (16.5 ft/sec) | |||
| Pressure | 400 bar (6000 psi) | |||
Note:for other materials or fluids please contact our engineering department