The 890 Series is a low-friction guide band made from MTC1, a high-compressive strength composite. This guide band is substantially stronger than polyamide-based materials and offers considerably lower water absorption. This new composite provides more accurate piston and rod guidance inside the cylinder under widely varying load conditions. Reduced bushing deformation allows the seals and wipers to perform at maximum efficiency, while minimizing the risk of scoring and abrasion. The 845 is split at a 45 degree angle, and the 890 is cut at a 90 degree angle.
Very accurate and precise guidance of the cylinder components
Withstands very high side loads during operation
Maximizes efficiency of the dynamic seals
Wide temperature range
The 890 Series Guide Band is the ideal solutions where high side loads and deflections are present.
Typical applications include:
The 890 Series Guide Band is made from MTC1, a thermoset polyester resin reinforced with a synthetic fabric.
|Polyester Resin Fabric||MTC1|
|Polyester Resin Fabric (mill duty)||MT20|
|water oil emulsions (HFA)||+5…+60||+41…+140|
|water-glycol fluids (HFC)||-40…+60||-40…+140|
|polyol esters (HFD)||-40…+100||-40…+140|
|Speed||1 m/s (3.3 ft/sec)|
|Load||<50 n/mm (<7250 psi)|
Note: for other materials or fluids please contact our engineering department.