Chemical Name
   
CAS #      
         
      System Seals  
Elastomer Name ASTM Desig. Rating Material Code  
Ethylene propylene rubber EPM ME01  
Nitrile NBR MN01  
Hydrogenate Nitrile HNBR MN03  
Polyurethane TPU MM01  
Silicone SI MS03  
Fluoro Silicone FSI MS04  
Aflas TFEP MA01  
Fluorocarbon FKM1 MF01  
Fluorocarbon FKM2 MF103  
Perfluorelastomer FFKM MF94  
Delrin / Acetal POM ML01  
Nylon PA ML02  
Polytetrafluoroethyene PTFE MT01  
Polyurethane HPU MP03  
Polyetheeretherkeytone PEEK MK01  
Polyethtlene UHMWPE ML03  
       
  0 Not Tested            
  1 Most Likely Compatible          
  2 Likely Compatible            
  3 Limited Compatibility. Contact our office for a full report.      
  4 Very Limited Compatibilty          
  5 Incompatible in one or more areas    
                 
**DISCLAIMER**                
The results indicated for the specified fluid and material combination are intended to serve as a
general guide for compatibility purposes. Best efforts are implements to ensure the reliability of the
data collected. However, the accuracy, reliability, or completeness of the furnished data is not
guaranteed or warranted in any way and System Seals, Inc. disclaim liability of any kind whatsoever,
including, without limitation, liability for quality, performance, mechanical function, safety, and fitness for a particular purpose arising out of use, or inability to use the data.
     
                 
*Please contact Kurt Sassmannshausen in R&D with further questions:          
kurtsassmannshausen@systemseals.com      
                 
Brand Name
   
CAS #      
         
      System Seals  
Elastomer Name ASTM Desig. Rating Material Code  
Ethylene propylene rubber EPM ME01  
Nitrile NBR MN01  
Hydrogenate Nitrile HNBR MN03  
Polyurethane TPU MM01  
Silicone SI MS03  
Fluoro Silicone FSI MS04  
Aflas TFEP MA01  
Fluorocarbon FKM1 MF01  
Fluorocarbon FKM2 MF103  
Perfluorelastomer FFKM MF94  
Delrin / Acetal POM ML01  
Nylon PA ML02  
Polytetrafluoroethyene PTFE MT01  
Polyurethane HPU MP03  
Polyetheeretherkeytone PEEK MK01  
Polyethtlene UHMWPE ML03  
       
0 Not Tested          
  1 Most Likely Compatible          
  2 Likely Compatible          
  3 Limited Compatibility. Contact our office for a full report.    
  4 Very Limited Compatibilty          
  5 Incompatible in one or more areas    
                 
**DISCLAIMER**                
The results indicated for the specified fluid and material combination are intended to serve as a general guide for compatibility purposes. Best efforts are implements to ensure the reliability of the data collected. However, the accuracy, reliabilty, or completeness of the the furnished data is not guaranteed or warranted in any way and System Seals, Inc. disclaim liability of any kind whatsoever, including, without limitation, liability for quality, performance, mechanical function, safety, and fitness for a particular purpose arising out of use, or inability to use the data.      
                 
*Please contact Kurt Sassmannshausen in R&D with further questions:       
kurtsassmannshausen@systemseals.com